+ 11.000 products ready for same day delivery + 10.000 products sold every day Distributing + 890.000 products + 519.009 products have been digitized + Best price, best service

Register

Related Products Feeler gauges INSIZE 4602-32

Digital vernier caliper-digital vernier caliper with carbide tipped meassurring face NIIGATA SEIKI GDCS-300W

Digital vernier caliper-digital vernier caliper with carbide tipped meassurring face NIIGATA SEIKI GDCS-300W Outside measuring range: 0...300mm; Inside meassurement range: 0...300mm; Fine adjustment function: No; SPC data output: Yes; Accuracy: ±0.04mm; Graduation/Resolution: 0.01mm

Digimatic height gage multi-function type with SPC data output MITUTOYO 192-664-10

Digimatic height gage multi-function type with SPC data output MITUTOYO 192-664-10 0...600mm; Graduation/resolution: 0.005mm, 0.01mm; Accuracy: ±0.04mm; Data transmission output (SPC): Yes; Cable

Depth micrometer MITUTOYO 329-351-30 0...12", 0...300mm; Graduation/resolution: 0.0001", 0.001mm; Accuracy: 0.00015", 3µm; Number of rods/pipe: 12; Extension rods/pipes size (Measuring range): 1", 10", 11", 12", 2", 3', 4", 5", 6", 7", 8", 9"

ABSOLUTE inside caliper knife-edge and inside groove and point jaw type MITUTOYO 573-645-20

ABSOLUTE inside caliper knife-edge and inside groove and point jaw type MITUTOYO 573-645-20 Inside meassurement range: 10.1....160mm; Fine adjustment function: No; SPC data output: Yes; Accuracy: ±0.05mm; Graduation/Resolution: 0.01mm

Vernier caliper with fine adjustment MITUTOYO 532-121

Vernier caliper with fine adjustment MITUTOYO 532-121 Outside measuring range: 0...11", 0...280mm; Inside meassurement range: 0...11", 0...280mm; Graduation/Resolution: 0.001", 0.02mm; Accuracy: ±0.04mm; Fine adjustment function: Yes

Steel rules (economic type) INSIZE 7110-2000

Steel rules (economic type) INSIZE 7110-2000 System of measurement: Inch, Metric; 2000mm/80"; Upper graduation: 0.5mm, 1mm; Lower graduation: 1/16", 1/32", 1/64"; Stainless steel

Outside micrometers with anvil extension collars MITUTOYO 105-409

Outside micrometers with anvil extension collars MITUTOYO 105-409 1100...1200mm; Graduation/resolution: 0.01mm; Accuracy: 22µm; Thimble type: Ratchet stop ; Anvil tip shape: Flat; Spindle tip shape: Flat

Taper gauge NIIGATA SEIKI TPG-270B Measuring range: 0.4...6mm; Graduation: 0.05mm; Body length: 158mm; Carbon tool steel

Dial snap meters MITUTOYO 523-132 1...2"; Graduation/resolution: 0.00005"; Accuracy: 0.00005"; Anvil tip shape: Flat; Spindle tip shape: Flat

Steel ruler MITUTOYO 182-207 System of measurement: Inch, Metric; 150mm/6"; Upper graduation: 1mm, 1/10"; Lower graduation: 0.5mm, 1/100"; Stainless steel

Tubular inside micrometers (extension rod type) MITUTOYO 137-011

Tubular inside micrometers (extension rod type) MITUTOYO 137-011 50...63mm; Graduation/resolution: 0.01mm; Accuracy: 3µm

Outside micrometers MITUTOYO 103-169 800...825mm; Graduation/resolution: 0.01mm; Accuracy: ±12µm; Thimble type: Ratchet stop ; Anvil tip shape: Flat; Spindle tip shape: Flat

ABSOLUTE coolant proof calipers with dust and water protection conforming to IP67 level MITUTOYO 500-763-20

ABSOLUTE coolant proof calipers with dust and water protection conforming to IP67 level MITUTOYO 500-763-20 Outside measuring range: 0...200mm, 0...8"; Inside meassurement range: 0...200mm, 0...8"; Fine adjustment function: No; SPC data output: Yes; Accuracy: ±0.01", ±0.02mm; Graduation/Resolution: 0.0005", 0.01mm

Dial caliper MITUTOYO 505-733 Outside measuring range: 0...200mm; Inside meassurement range: 0...200mm; Graduation/Resolution: 0.01mm; Accuracy: ±0.03mm; Fine adjustment function: Yes

Tubular inside micrometers (extension rod type) MITUTOYO 137-207

Tubular inside micrometers (extension rod type) MITUTOYO 137-207 0...300mm; Graduation/resolution: 0.01mm; Accuracy: 3µm; Number of rods/pipe: 5; Extension rods/pipes size (Measuring range): 100mm, 13mm, 25mm, 50mm

Flexible stainless steel rule hard chrome finish SHINWA 13293

Flexible stainless steel rule hard chrome finish SHINWA 13293 System of measurement: Metric; 2m; Upper graduation: 1mm; Lower graduation: 1mm; Stainless steel

QuantuMike IP65 micrometer with 2 mm per revolution spindle feed MITUTOYO 293-181-30

QuantuMike IP65 micrometer with 2 mm per revolution spindle feed MITUTOYO 293-181-30 1...2", 25...50mm; Accuracy: ±0.00005"; Data transmission output (SPC): Yes; Thimble type: Ratchet stop ; Anvil tip shape: Flat; Spindle tip shape: Flat; Spindle lock: Yes

Vernier caliper with nib style jaws and fine adjustment MITUTOYO 160-150

Vernier caliper with nib style jaws and fine adjustment MITUTOYO 160-150 Outside measuring range: 0...300mm; Inside meassurement range: 10.1...300mm; Graduation/Resolution: 0.001", 0.02mm; Accuracy: ±0.04mm; Fine adjustment function: Yes

Digimatic outside micrometers (Data output) MITUTOYO 293-782

Digimatic outside micrometers (Data output) MITUTOYO 293-782 12...13", 300...325mm; Graduation/resolution: 0.0001", 0.001mm; Accuracy: ±0.0003", ±6µm; Data transmission output (SPC): Yes; Thimble type: Ratchet stop ; Anvil tip shape: Flat; Spindle tip shape: Flat; Spindle lock: Yes

Digimatic height gage multi-function type with SPC data output MITUTOYO 192-614-10

Digimatic height gage multi-function type with SPC data output MITUTOYO 192-614-10 0...600mm; Graduation/resolution: 0.005mm, 0.01mm; Accuracy: ±0.05mm; Data transmission output (SPC): Yes; Cable

Digimatic outside micrometers MITUTOYO 293-821-30

Digimatic outside micrometers MITUTOYO 293-821-30 0...25mm; Graduation/resolution: 0.0001"; Accuracy: ±2µm; Data transmission output (SPC): No; Thimble type: Ratchet stop ; Anvil tip shape: Flat; Spindle tip shape: Flat; Spindle lock: Yes

Digital height gauge NIIGATA SEIKI VHS-30D

Digital height gauge NIIGATA SEIKI VHS-30D 0...300mm; Graduation/resolution: 0.01mm; Accuracy: ±0.04mm; Data transmission output (SPC): No

Disk micrometers MITUTOYO 323-352-30 2...3", 50...75mm; Graduation/resolution: 0.00005", 0.001mm; Accuracy: ±0.0003", ±6µm; Data transmission output (SPC): Yes; Thimble type: Ratchet stop ; Anvil tip shape: Disc; Spindle tip shape: Disc; Spindle lock: Yes

Depth micrometer MITUTOYO 128-101 0...25mm; Graduation/resolution: 0.01mm; Accuracy: ±3µm

Coolant proof micrometers with dust water protection conforming to IP65 level MITUTOYO 293-237-30

Coolant proof micrometers with dust water protection conforming to IP65 level MITUTOYO 293-237-30 75...100mm; Graduation/resolution: 0.001mm; Accuracy: ±2µm; Data transmission output (SPC): Yes; Thimble type: Ratchet thimble; Anvil tip shape: Flat; Spindle tip shape: Flat; Spindle lock: Yes

Steel ruler MITUTOYO 182-271 System of measurement: Metric; 600mm; Upper graduation: 1mm; Lower graduation: 0.5mm; Stainless steel

ABSOLUTE digimatic caliper with nib style and standard jaws MITUTOYO 551-227-10

ABSOLUTE digimatic caliper with nib style and standard jaws MITUTOYO 551-227-10 Outside measuring range: 0...1000mm, 0...40"; Inside meassurement range: 1.004...41"; Fine adjustment function: No; SPC data output: Yes; Accuracy: ±0.003"; Graduation/Resolution: 0.0005", 0.01mm

Point micrometers MITUTOYO 112-216 75...100mm; Graduation/resolution: 0.01mm; Accuracy: ±4µm; Thimble type: Ratchet stop ; Anvil tip shape: Point; Spindle tip shape: Point

Stainless steel rule hard chrome finish SHINWA 13021

Stainless steel rule hard chrome finish SHINWA 13021 System of measurement: Metric; 60cm; Upper graduation: 1mm; Lower graduation: 0.5mm; Stainless steel

Digital vernier caliper-digital vernier caliper with carbide tipped meassurring face NIIGATA SEIKI GDCS-200

Digital vernier caliper-digital vernier caliper with carbide tipped meassurring face NIIGATA SEIKI GDCS-200 Outside measuring range: 0...200mm; Inside meassurement range: 0...200mm; Fine adjustment function: No; SPC data output: Yes; Accuracy: ±0.03mm; Graduation/Resolution: 0.01mm

Steel rules (economic type) INSIZE 7110-200

Steel rules (economic type) INSIZE 7110-200 System of measurement: Inch, Metric; 200mm/8"; Upper graduation: 0.5mm, 1mm; Lower graduation: 1/16", 1/32", 1/64"; Stainless steel

Spline micrometers MITUTOYO 331-362-30 1...2", 25...50mm; Graduation/resolution: 0.00005", 0.001mm; Accuracy: ±0.0001"; Data transmission output (SPC): Yes; Thimble type: Ratchet stop ; Anvil tip shape: Flat; Spindle tip shape: Flat; Spindle lock: Yes

QuantuMike IP65 micrometer with 2 mm per revolution spindle feed MITUTOYO 293-146-30

QuantuMike IP65 micrometer with 2 mm per revolution spindle feed MITUTOYO 293-146-30 25...50mm; Accuracy: ±1µm; Data transmission output (SPC): No; Thimble type: Ratchet stop ; Anvil tip shape: Flat; Spindle tip shape: Flat; Spindle lock: Yes

Coolant proof micrometers with dust water protection conforming to IP65 level MITUTOYO 293-334-30

Coolant proof micrometers with dust water protection conforming to IP65 level MITUTOYO 293-334-30 0...1", 0...25mm; Graduation/resolution: 0.00005", 0.001mm; Accuracy: ±0.00005", ±1µm; Data transmission output (SPC): Yes; Thimble type: Ratchet thimble; Anvil tip shape: Flat; Spindle tip shape: Flat; Spindle lock: Yes

Sheet metal micrometer MITUTOYO 119-202 0...25mm; Graduation/resolution: 0.01mm; Accuracy: ±4µm; Anvil tip shape: Flat; Spindle tip shape: Flat; Anvil face dimension: D6.3 mm; Spindle face dimension: D6.3mm

Steel rules (economic type) INSIZE 7110-600

Steel rules (economic type) INSIZE 7110-600 System of measurement: Inch, Metric; 600mm/24"; Upper graduation: 0.5mm, 1mm; Lower graduation: 1/16", 1/32", 1/64"; Stainless steel

QuantuMike IP65 micrometer with 2 mm per revolution spindle feed MITUTOYO 293-185-30

QuantuMike IP65 micrometer with 2 mm per revolution spindle feed MITUTOYO 293-185-30 0...1", 0...25mm; Accuracy: ±0.00005"; Data transmission output (SPC): No; Thimble type: Ratchet stop ; Anvil tip shape: Flat; Spindle tip shape: Flat; Spindle lock: Yes

Neck caliper ABSOLUTE digimatic type MITUTOYO 573-752-20

Neck caliper ABSOLUTE digimatic type MITUTOYO 573-752-20 Outside measuring range: 0...150mm, 0...6"; Fine adjustment function: No; SPC data output: Yes; Accuracy: ±0.0015", ±0.03mm; Graduation/Resolution: 0.0005", 0.01mm

Rubbergrip tape rule STANLEY 30-608L System of measurement: Shaku; Measurement range: 3m; Upper graduation: 1mm; Steel; Lacquer coated

Outside micrometers with anvil extension collars MITUTOYO 105-408

Outside micrometers with anvil extension collars MITUTOYO 105-408 1000...1100mm; Graduation/resolution: 0.01mm; Accuracy: 20.67µm; Thimble type: Ratchet stop ; Anvil tip shape: Flat; Spindle tip shape: Flat

Steel ruler MITUTOYO 182-107 System of measurement: Inch, Metric; 150mm/6"; Upper graduation: 0.5mm, 1/100"; Lower graduation: 1mm, 1/10"; Stainless steel

Thickness gages INSIZE 2365-20 Measuring range: 0...20mm; Graduation/resolution: 0.01mm; Accuracy: ±0.03mm; Throat depth: 120mm; Operating mechanism: Thumb lever; Anvil shape: Flat; Anvil dimension: D10mm; Anvil material: Ceramic

ABSOLUTE digimatic caliper with nib style jaws MITUTOYO 550-225-10

ABSOLUTE digimatic caliper with nib style jaws MITUTOYO 550-225-10 Outside measuring range: 0...24", 0...600mm; Inside meassurement range: 0.504...24.5"; Fine adjustment function: No; SPC data output: Yes; Accuracy: ±0.002"; Graduation/Resolution: 0.0005", 0.01mm

Vernier calipers standard model MITUTOYO 530-101

Vernier calipers standard model MITUTOYO 530-101 Outside measuring range: 0...150mm; Inside meassurement range: 0...150mm; Graduation/Resolution: 0.05mm; Accuracy: ±0.05mm; Fine adjustment function: No

Blade micrometers (non rotating spindle type) MITUTOYO 422-370-30

Blade micrometers (non rotating spindle type) MITUTOYO 422-370-30 0...1", 0...25mm; Graduation/resolution: 0.00005", 0.001mm; Accuracy: ±0.00015"; Data transmission output (SPC): Yes; Thimble type: Ratchet stop ; Anvil tip shape: Blade (Vertical); Spindle tip shape: Blade; Spindle lock: Yes

Digital outside micrometer NIIGATA SEIKI MCD130-75

Digital outside micrometer NIIGATA SEIKI MCD130-75 50...75mm; Graduation/resolution: 0.001mm; Accuracy: 6µm; Data transmission output (SPC): No; Thimble type: Ratchet stop ; Anvil tip shape: Flat; Spindle tip shape: Flat; Spindle lock: Yes

ABSOLUTE coolant proof carbon fiber caliper with interchangeable jaws MITUTOYO 552-195-10

ABSOLUTE coolant proof carbon fiber caliper with interchangeable jaws MITUTOYO 552-195-10 Outside measuring range: 0...2000mm, 0...80"; Fine adjustment function: No; SPC data output: Yes; Accuracy: ±0.005"; Graduation/Resolution: 0.0005", 0.01mm

Spline micrometers MITUTOYO 111-119 100...125mm; Graduation/resolution: 0.01mm; Accuracy: ±4µm; Thimble type: Ratchet stop ; Anvil tip shape: Flat; Spindle tip shape: Flat

Tape measures HUWEI HU-359E System of measurement: Metric; Measurement range: 3m; Upper graduation: 1mm; Lower graduation: 1mm; Steel

Point micrometers MITUTOYO 342-351-30 0...1", 0...25mm; Graduation/resolution: 0.00005", 0.001mm; Accuracy: ±0.0001", ±2µm; Data transmission output (SPC): Yes; Thimble type: Ratchet stop ; Anvil tip shape: Point; Spindle tip shape: Point; Spindle lock: Yes

Policies

Customer support

Bao An Automation

Hotline South: (+84)936 862 799

Hotline Central Region: (+84)904 460 679

Hotline North: (+84)936 985 256

Bao An Technique Service Joint Stock Company

Haiphong Office and Warehouse: Ben Thoc Street, An Dong Ward, An Duong Dist.

Hanoi Office and Warehouse: No. 3/38, Chu Huy Man Str., Phuc Dong Ward, Long Bien Dist.

Ho Chi Minh Office and Warehouse: No. 204, No Trang Long Str., Ward 12, Binh Thanh Dist.

Factory: Ben Thoc Street, An Dong Ward, An Duong Dist., Haiphong City, Vietnam

Tax code: 0200682529 - Date: 31/07/2006

Invoice address: 3A Ly Tu Trong Street, Minh Khai Ward, Hong Bang District, Hai Phong City, Viet Nam

Phone: (+84)2253 79 78 79

Cổng thông tin quản lý hoạt động thương mại điên tử

Designed by Bao An Technical Service Joint Stock Company

Contact for quote: baoan@baoanjsc.com.vn - Contact for cooperation: doitac@baoanjsc.com.vn - Just visited: 16 - Visited: 151.265.719